MAGNETIC-ABRASIVE PROCESSING OF CYLINDRICAL RADIUSPROFILE ROLLERS

Authors

  • L. M. Akulovich Belarusian State Agrarian Technical University, Ministry of Agriculture and Food of the Republic of Belarus, 99 Nezavisimosti Ave., 220023 Minsk, the Republic of Belarus Автор
  • L. E. Sergeev Belarusian State Agrarian Technical University, Ministry of Agriculture and Food of the Republic of Belarus, 99 Nezavisimosti Ave., 220023 Minsk, the Republic of Belarus Автор
  • O. N. Voroshuho Belarusian State Agrarian Technical University, Ministry of Agriculture and Food of the Republic of Belarus, 99 Nezavisimosti Ave., 220023 Minsk, the Republic of Belarus Автор

Keywords:

magnetic-abrasive processing; pole tip; crescent gap; topography of the magnetic field; composite surfaces

Abstract

The results of modeling of the topography of the magnetic field in the working gap are presented in the case
of magnetic-abrasive processing of the ball bearing treadmill. It is shown that the coverage of the treadmill with a pole
tip with a return radius ensures a uniform distribution of the magnetic induction in the working gap. Using the crescent
shape of the working gap increases the pressure of the ferro-abrasive powder on the treated surface. Calculation
of the magnitude of the pressure of the ferro-abrasive powder on the local parts of the treated surface is given. According
to the results of experimental studies, it has been shown that magnetic-abrasive processing of the ball bearing tread
path in comparison with superfinishing reduces the microroughness height up to 2 times and increases the residual
compressive stresses by an average of 20%.

Fig. 7. Table 3. Ref.: 20 titles.

Downloads

Published

2018-06-01

Issue

Выпуск 6. Июнь 2018 года

Section

МАШИНОСТРОЕНИЕ И МАШИНОВЕДЕНИЕ

License

Copyright (c) 2023 Вестник БарГУ Серия "Технические науки"

Лицензия Creative Commons

Это произведение доступно по лицензии Creative Commons «Attribution-NonCommercial» («Атрибуция — Некоммерческое использование») 4.0 Всемирная.

Авторы сохраняют за собой право заключать определенные договорные соглашения, касающиеся неисключительного распространения опубликованной версии работы (например, размещать ее в институциональном репозитории, публикация в книге) со ссылкой на ее первоначальную публикацию в этом журнале.